заходим в реску моде
качаем образ проксмос
# In rescue bash :
apt -y install ovmf wget
wget -O pve.iso http://download.proxmox.com/iso/proxmox-ve_8.1-1.iso
# you can check the latest one on http://download.proxmox.com/iso/

Начните установку proxmox с помощью VNC
```bash
printf "change vnc password\n%s\n" "abcd_123456" | qemu-system-x86_64 -enable-kvm -cpu host -smp 4 -m 4096 -boot d -cdrom ./pve.iso -drive file=/dev/nvme0n1,format=raw,media=disk,if=virtio -drive file=/dev/nvme1n1,format=raw,media=disk,if=virtio -drive file=/dev/nvme2n1,format=raw,media=disk,if=virtio -vnc :0,password -monitor stdio -no-reboot
```

**Подключитесь к любому VNC-клиенту к IP-адресу вашего сервера с помощью пароля abcd_123456 и ставим прокссмос**

Послеустановки проксмос
Временно запустите proxmox на порту 5555 для базовых конфигураций.
```bash
qemu-system-x86_64 -enable-kvm -cpu host -device e1000,netdev=net0 -netdev user,id=net0,hostfwd=tcp::5555-:22 -smp 4 -m 4096 -drive file=/dev/nvme0n1,format=raw,media=disk,if=virtio -drive file=/dev/nvme1n1,format=raw,media=disk,if=virtio -drive file=/dev/nvme2n1,format=raw,media=disk,if=virtio
```
подключаемся к серверу по ssh через порт 5555 с паролем который использовали при установке проксмоса


правим сетевые настройки
nano /etc/network/interfaces
```bash
source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

iface lo inet6 loopback

auto enp41s0
iface enp41s0 inet static
address 65.108.238.178/26
gateway 65.108.238.129
up route add -net 65.108.238.128 netmask 255.255.255.192 gw 65.108.238.129 dev enp41s0
# route 65.108.238.128/26 via 65.108.238.129

iface enp41s0 inet6 static
address 2a01:4f9:1a:b2ae::2/64
gateway fe80::1

iface eth0 inet manual

auto vmbr100
iface vmbr100 inet static
        address 192.168.100.1
        netmask 255.255.255.0
        bridge-ports none
        bridge-stp off
        bridge-fd 0

#NAT

post-up echo 1 > /proc/sys/net/ipv4/ip_forward
post-up iptables -t nat -A POSTROUTING -s '192.168.100.0/24' -o enp41s0 -j MASQUERADE
post-down iptables -t nat -D POSTROUTING -s '192.168.100.0/24' -o enp41s0 -j MASQUERADE

post-up   iptables -t raw -I PREROUTING -i fwbr+ -j CT --zone 1
post-down iptables -t raw -D PREROUTING -i fwbr+ -j CT --zone 1


```

настраиваем репозитории

nano /etc/apt/sources.list
```bash
deb http://mirror.hetzner.com/debian/packages bookworm main contrib non-free-firmware
deb http://mirror.hetzner.com/debian/packages bookworm-updates main contrib non-free-firmware
deb http://deb.debian.org/debian bookworm main contrib non-free-firmware
# deb-src http://deb.debian.org/debian bookworm main contrib non-free-firmware

deb http://deb.debian.org/debian bookworm-updates main contrib non-free-firmware
# deb-src http://deb.debian.org/debian bookworm-updates main contrib non-free-firmware

# deb http://deb.debian.org/debian bookworm-backports main contrib non-free-firmware
# deb-src http://deb.debian.org/debian bookworm-backports main contrib non-free-firmware

deb http://security.debian.org/debian-security bookworm-security main contrib non-free-firmware
# deb-src http://security.debian.org/debian-security bookworm-security main contrib non-free-firmware

```

Настраиваем hosts
sudo nano /etc/hosts
```bash
127.0.0.1 localhost.localdomain localhost
65.108.238.178 proxZFS.stakevillage.net proxZFS

# The following lines are desirable for IPv6 capable hosts

::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
```

```bash
# все параметры
zfs get all rpool

zfs get compression rpool
zfs set compression=off rpool
zfs set compression=on rpool
zfs set compress=lz4 rpool
zfs set compress=lzjb rpool
zfs set compress=lz4 rpool
set zfs:zfs_prefetch_disable = 1
zfs set atime=off rpool
zfs set compress=lzjb rpool
zfs set sync=disabled rpool
zfs get compression rpool
```