Utils

Войдите в консоль корневого сервера Hetzner и перейдите в раздел Rescue Mode, чтобы загрузить сервер в режиме восстановления. Заходим на терминал и там предложат установить ОС командой installimage

Запускаем, выбираем Other (!!NO SUPPORT!!) - Proxmox7 installimage

Разметка диска, настраиваем RAID0 (так я делал в prox8)

DRIVE1 /dev/nvme0n1
DRIVE2 /dev/nvme1n1
SWRAID 1
SWRAIDLEVEL 0 # Use 1 for Raid 1

HOSTNAME prox8 # Set correct hostname

PART /boot/efi esp 256M
PART /boot ext4 1024M
PART lvm vg0 all

LV vg0 root / ext4 20G
LV vg0 swap swap swap 8G
LV vg0 data /var/lib/vz  ext4 all

# List images with ls /root/.oldroot/nfs/install/../images
IMAGE /root/.oldroot/nfs/install/../images/Debian-1107-bullseye-amd64-base.tar.gz

Разметка диска, настраиваем RAID0 (так было в prox7)

DRIVE1 /dev/nvme0n1
DRIVE2 /dev/nvme1n1
SWRAID 1
SWRAIDLEVEL 0 # Use 1 for Raid 1
BOOTLOADER grub
HOSTNAME prox7 # Set correct hostname
PART /boot ext4 1024M
PART lvm vg0 all

LV vg0 root / ext4 20G
LV vg0 swap swap swap 8G
LV vg0 data /var/lib/vz  ext4 all # or ext4 300G

# List images with ls /root/.oldroot/nfs/install/../images
IMAGE /root/.oldroot/nfs/install/../images/Debian-1105-bullseye-amd64-base.tar.gz

Настройка сети с NAT и мрашрутизацией для виртуалных машин. Взято тут https://adminwin.ru/nastroyka-nat-dlya-virtualynh-mashin-proxmox/

nano /etc/network/interfaces

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

iface lo inet6 loopback

auto enp7s0
iface enp7s0 inet static
        address 65.109.116.119/26
        gateway 65.109.116.65
        up route add -net 65.109.116.64 netmask 255.255.255.192 gw 65.109.116.65 dev enp7s0
# route 65.109.116.64/26 via 65.109.116.65

iface enp7s0 inet6 static
        address 2a01:4f9:3051:1005::2/64
        gateway fe80::1

iface eth0 inet manual

#auto vmbr100
#iface vmbr100 inet static
#       address 192.168.100.0/24
#       bridge-ports none
#       bridge-stp off
#       bridge-fd 0

auto vmbr100
iface vmbr100 inet static
        address 192.168.100.1
        netmask 255.255.255.0
        bridge-ports none
        bridge-stp off
        bridge-fd 0

#NAT

post-up echo 1 > /proc/sys/net/ipv4/ip_forward
post-up iptables -t nat -A POSTROUTING -s '192.168.100.0/24' -o enp7s0 -j MASQUERADE
post-down iptables -t nat -D POSTROUTING -s '192.168.100.0/24' -o enp7s0 -j MASQUERADE

post-up   iptables -t raw -I PREROUTING -i fwbr+ -j CT --zone 1
post-down iptables -t raw -D PREROUTING -i fwbr+ -j CT --zone 1

OVH

iface lo inet loopback

iface eno1 inet manual

iface enp3s0f1 inet manual

auto vmbr0
iface vmbr0 inet static
        address 167.114.172.204/24
        gateway 167.114.172.254
        bridge-ports eno1
        bridge-stp off
        bridge-fd 0
        hwaddress AC:1F:6B:05:B7:84

iface vmbr0 inet6 static
        address 2607:5300:60:73cc::/64
        gateway 2607:5300:60:73ff:ff:ff:ff:ff

#auto vmbr100
#iface vmbr100 inet static
#       address 192.168.100.0/24
#       bridge-ports none
#       bridge-stp off
#       bridge-fd 0



#auto vmbr0
#iface vmbr0 inet static
#        address 167.114.172.204/24
#        gateway 167.114.172.254
#        bridge-ports eno1
#        bridge-stp off
#        bridge-fd 0
#        hwaddress AC:1F:6B:05:B7:84

auto vmbr100
iface vmbr100 inet static
        address 192.168.100.1/24
        bridge-ports none
        bridge-stp off
        bridge-fd 0
        post-up echo 1 > /proc/sys/net/ipv4/ip_forward
        post-up iptables -t nat -A POSTROUTING -s '192.168.100.0/24' -o vmbr0 -j MASQUERADE
        post-down iptables -t nat -D POSTROUTING -s '192.168.100.0/24' -o vmbr0 -j MASQUERADE
#NAT

post-up   iptables -t raw -I PREROUTING -i fwbr+ -j CT --zone 1
post-down iptables -t raw -D PREROUTING -i fwbr+ -j CT --zone 1